Cd/Mp3/Wma Operations - Clarion CZ202E Manual De Instrucciones Y De Instalación

Radio Data System Operations
Manually tuning a regional station
in the same network
This function is valid when the AF function is
ON and the REG function is OFF.
Manually tuning a regional station in
the same network
This function is valid when the AF function is ON
and the REG function is OFF.
Note:
This function can be used when a regional
broadcast of the same network is received.
TA (Traffic Announcement)
In the TA standby mode, when a traffic
announcement broadcast starts, the traffic
announcement broadcast is received as top
priority regardless of the function mode so you
can listen to it. Traffic programme (TP)
automatic tuning is also available.
* This function can only be used when "TP"
appears in the display. When "TP" appears,
this means that the "Radio Data System"
broadcast station being received has traffic
announcement programmes.
Setting the TA standby mode
If you press the [TA] button, "TA" lights in the
display and the unit is set into the TA standby
mode until a traffic announcement is broadcast.

CD/MP3/WMA Operations

This unit can playback MP3/WMA
files
Notes:
• If you play a WMA file with active DRM (Digital
Rights Management), there will be no audio.
To disable DRM
(Digital Rights Management)
When using Windows Media Player 9/10/11,
click on Tool -> Options -> Copy music tab, then
under Copy settings, unclick the Check box for
copy protected music. Then, reconstruct files.
Personally constructed WMA files are used at
your own responsibility.
7
CZ202E/CZ202ER/CZ202EG
When a traffic announcement broadcast
starts, "TRAF INF" appears in the display.
If you press the [TA] button while a traffic
announcement broadcast is being received,
t h e t r a f f i c a n n o u n c e m e n t b r o a d c a s t
reception is cancelled and the unit goes into
the TA standby mode.
Cancelling the TA standby mode
As "TA" lits in the display, press the [TA]
button. The "TA" in the display goes off and
the TA standby mode is cancelled.
PTY (Programme Type)
This function enables you to listen to a
broadcast of the selected programme type
even if the unit is on a function mode other
than radio.
* Some countries do not yet have PTY
broadcast.
* In the TA standby mode, a TP station
has priority over a PTY broadcast
station.
Selecting PTY
Press [MENU] button, then rotate the
[ V O L U M E ] k n o b t o s e l e c t P T Y t y p e ,
press the [VOLUME] knob, the unit begin
searching.
Precautions when creating MP3/
WMA file
Usable sampling rates and bit rates
1. MP3: Sampling rate 8 kHz-48 kHz,
BIT rate 8 kbps-320 kbps / VBR
2. WMA: Bit rate 8 kbps-320 kbps
File extensions
1. Always add a file extension ".MP3",
".WMA" to MP3, WMA file by using
single byte letters. If you add a file
extension other than specified or forget
to add the file extension, the file cannot
be played.
CD/MP3/WMA Operations
2. Files without MP3/WMA data will not play.
The files will be played soundlessly if you
attempt to play files without MP3/WMA data.
* When VBR files are played, the play time
display may differ the play location.
* When MP3/WMA files are played, a little no
sound part is caused between tunes.
Logical format (File system)
1. When writing MP3/WMA file on a CD-R disc
or CD-RW disc, please select "ISO9660 level
1, 2 or Joliet" or Apple ISO as the writing
software format. Normal play may not be
possible if the disc is recorded on another
format.
2. The folder name and file name can be
displayed as the title during MP3/WMA play
but the title must be within 32 single byte
alphabetical letters and numerals (including
an extension).
3. Do not affix a name to a file inside a folder
having the same name.
Folder structure
A d i s c w i t h a f o l d e r h a v i n g m o r e t h a n 8
hierarchical levels will be impossible.
Number of files or folders
1. Up to 999 files can be recognized per folder.
Up to 3000 files can be played.
2. Tracks are played in the order that they were
recorded onto a disc. (Tracks may not always
be played in the order displayed on the PC.)
3. Some noise may occur depending on the type
of encoder software used while recording.
Eject function
Just pressing the [ ] button, ejects the disc.
Notes:
• If you force a CD into before auto reloading,
this can damage the CD.
• If a CD (12 cm) is left ejected for 15 seconds,
the CD is automatically reloaded (Auto
reload).
Listening to a disc already loa ded in the unit
Press the [SRC /
] button to select the CD/
MP3/WMA mode.
When the unit enters the CD/MP3/WMA
mode, play starts automatically.
Loading a CD
Insert a CD into the center of the CD
SLOT with label facing up. The CD plays
automatically after loading.
Notes:
• Never insert foreign objects into the CD
SLOT.
• If the CD is not inserted easily, there
may be another CD in the mechanism
or the unit may require service.
• Discs without the or mark
TEXT
and CD-ROMs cannot be played by this
unit.
• Some CD-R/CD-RW discs may not be
usable.
Pausing play
1. Press the [ 4 ] button to pause play.
"PAUSE" appears in the display.
2. To resume CD play, press the [ 4 ] button
again.
Displaying CD titles
This unit can display title data for MP3/
WMA disc.
When SCROLL is OFF, each time you
press the [DISP] button to change the title
display.
MP3/WMA disc
Track -> Folder -> File title -> Album -> Title
-> Artist -> Track ...
Notes:
• If MP3/WMA disc has no ID3 TAG, "NO
TITLE" appears in the display.
• Only ASCII characters can be displayed
in Tags.