Wearing Parts - Oase FP 2500 Instrucciones De Uso

Pos: 41 /Pumpen/Schlammsauger/Filterpumpe 2500-3500/Reinigung und Wartung Filterpumpe @ 10\mod_1248790933545_121.doc @ 66878 @
Maintenance and cleaning (B)
Attention! Dangerous electrical voltage.
Possible consequences: Death or severe injury.
Protective measures: Disconnect the power plug prior to reaching into the water and commencing
work.
Open strainer casing and remove pump. Unscrew pump lid and remove impeller. Clean all components using clean
water and a brush.
After cleaning the pump, reassemble in the reverse order. Insert pump in the strainer casing. Regarding the 2500
series of the filter pump, ensure correct seating of the rubber buffers used for the bearing of the pump. Route connecti-
on cable such that it cannot be pinched. Refit strainer lid and close.
Pos: 42 /Pumpen/Schlammsauger/Pondovario/Lagern Pondovario, Nautilus Start @ 0\mod_1127211171047_121.doc @ 5983 @
Storage/Over-wintering
Remove the unit at temperatures below zero degrees centigrade. Thoroughly clean the unit, check for damage and
store immersed in water in a frost-free environment. Do not immerse the plug!
Pos: 43 /Pumpen/Schlammsauger/Pondovario/Verschleißteile Pondovario, Nautilus Start @ 0\mod_1127211527237_121.doc @ 6033 @

Wearing parts

The rotor is a wearing part and is, therefore, not covered by our warranty.
Pos: 44 /Alle Produkte/Entsorgung - gem. Bestimmungen/Fachhändler @ 0\mod_1125578523312_121.doc @ 1407 @
Disposal
Dispose of the unit in accordance with the national legal regulations.
Pos: 45 /Pumpen/Schlammsauger/Pondovario/Störung Pondovario, Nautilus Start @ 0\mod_1127211750285_121.doc @ 6058 @
Malfunctions
Malfunction
The unit is not operating
Insufficient delivery rate
Unit switches off after a short running period
Pos: 46 /Alle Produkte/Dummy_module/===== Seitenwechsel ===== @ 0\mod_1125648978015_0.doc @ 1630 @
Cause
No mains voltage
Impeller blocked
Strainer casing clogged
Excessive pressure losses in the hoses
Water temperature too high
Remedy
Check mains voltage
Clean impeller
Clean strainer casing
Reduce hose length and connecting parts to a
minimum, route hoses as straight as possible
Note maximum water temperature of +35°C
- GB -
7