Graphic User Interface - Elta 6740 Manual De Instrucciones

PREPARATION OF THE REMOTE CONTROL
Installation of the battery A
Insert the battery while observing the correct (+) and (-)
polarity as illustrated at the right side.
Notes about the remote control
• Use one CR2025 lithium button cell.
• The battery usually will work for about one year; this depends
on how often the remote control unit is used.
• If the remote control unit fails to work even when it is
operated near the player, replace the battery.
• Do not attempt to recharge, short-circuit, disassemble, warm
up or throw the battery into the fire.
• Do not drop, step on or otherwise impact the remote control.
This may lead to malfunction.
• If the remote control unit is not going to be used for a long
time, remove the battery.
Remote control operation range
Direct the remote control unit from no more than about 7 m
from the remote control sensor and within an angle about 60°
towards the sensor window on the front of the player.
Notes about the operation range of the remote control:
• Do not direct bright lamps towards the sensor.
• The operation range depends on the brightness of the room.
• Objects between the remote control and sensor window
block the transmission.
• Do not use the remote control at the same time with remote
controls of other devices.
OPERATING INSTRUCTIONS

GRAPHIC USER INTERFACE

Information and settings can be displayed on the screen of the TV set or DVD player.
PREPARATION
Turn on the TV set and select the video input mode.
B
A
B
SENSOR OF THE REMOTE CONTROL
7 m
30 30
DISPLAY SETUP MUTE
P/N
1 2 3
4 5 6
A-B
REPEAT
7 8 9
1/ALL
MENU CLEAR
0 +10
SUBTITLE PLAY STOP
TITLE SELECT
AUDIO PAUSE/STEP SLOW
F.BWD F.FWD PREV NEXT
ANGLE ZOOM PROGRAM SEARCH
27.