Radio Operation; Stereo Headphone Jack - Elta 6740 Manual De Instrucciones

RADIO OPERATION

RADIO
1. Rotate the function selector to the RADIO position.
2. Select the desired band with the band rotary switch. Set the volume to a pleasant level.
3. Use the TUNING rotary knob to locate the radio stations (Turn the rotary knob to the left or right, until you
have the best reception).
4. The built in AM antenna and the external FM telescopic antenna are depending on the direction.
• Extend the FM telescopic antenna and rotate its position until you find the best reception
• For AM reception rotate the entire until you find the best reception
5. Adjust the volume level to a pleasant listening level.
6. To turn off the radio, turn the function selector to the OFF position
NOTES:
• If the stereo signal of a single radio station is weak and you hear a lot of noise, set the band switch to the
FM (MONO) position. This often improves the reception.
• If the band switch is set to the FM ST position and a stereo broadcast is received, the FM ST indicator on
top of the player will light up.

STEREO HEADPHONE JACK

The player is equipped with a stereo headphone jack on the rear, so that you can listen to the music without
disturbing others. Plug in the headphones (not included) and adjust the volume control to a pleasant level.
NOTE: With the connection of external headphones the speakers of the player are turned off.
34.