Margin Stops - Humanware SmartView Xtend Guia Del Usuario

English
This can be useful for several reasons. You may find
that a high level of brightness causes too much glare in
Text Mode, for example, but that the same level works
well when you are viewing pictures.
Note: The screen is set up when your SmartView Xtend
is installed. If you want to adjust the brightness and
contrast of the screen, use the Brightness button on the
SmartView Xtend and the Brightness and Contrast
options on the menu.

Margin Stops

Use the Margin Stops to reduce the movement range of
the reading table for a particular document. This can
prevent your reading material from disappearing off the
edge of the screen as you read.
To set margins:
1. Unscrew the left-hand Margin Stop.
2. Line up the left-hand margin of your reading
material with the screen.
3. Slide the left-hand Margin Stop as far to the right
as possible and tighten it.
4. Unscrew the right-hand Margin Stop.
5. Line up the right-hand margin of the reading
material with the screen.
6. Slide the Margin Stop as far to the left as
possible and tighten it.
14