Preferences Menu; Footswitch - Humanware SmartView Xtend Guia Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Full external video camera screen.
To adjust the split screen:
Press the Lines key on the Keypad to switch
between a horizontal and vertical split.
Press the Blinds key on the Keypad to switch
between top and bottom and left and right.
Use the appropriate Arrow Keys on the Keypad to
move the split left, right, up, or down.
Press C on the Keypad at any time for a 50% split
in vertical and horizontal modes. This is the
factory setting.
Note: Split-screen mode is only available when a VGA
monitor is attached to the VGA output. If there is no
VGA monitor attached, you will hear a warning beep
when you press the PC key.

Preferences Menu

The Preferences menu is available with upgrade
Modules 2 and 3. See Xtend Module 2/Preferences
Menu (on page 41).

Footswitch

The Footswitch is included with Module 3. You can use it
to display the contents of a PC screen and/or external
camera on your SmartView Xtend.
46

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido