Logitech QuickCam Guia Del Usuario página 3

3
Connect Your Camera to Your Computer
Wait until you are prompted by the software before
connecting your camera to an available USB port on
your computer.
4
Position Your Camera, Microphone,
and Speakers
Your camera comes with Logitech
RightSound
background noise. The following steps will ensure the best
possible audio performance:
• Position your camera in the middle of your monitor
for optimal eye contact.
• Position your camera's microphone no more than 1 m away
from you and point it toward you.
• Position your speakers (if used) at least 30 cm away from
your microphone to reduce feedback, and then angle your
speakers away from your microphone.
Tip Do not place objects between you and the microphone.
4 QuickCam ® Pro for Notebooks
® ™
RightSound Technology.
™
Technology cancels echo and signifi cantly reduces
5
The Audio Tuning Wizard
The fi rst time that you start QuickCam, you are guided through
the Microphone/Speaker Setup Utility and Audio Tuning Wizard
that lets you do the following:
• Select the audio input device (microphone)
and audio output device (speakers).
• Enable Acoustic Echo Cancellation (AEC)—recommended.
• Enable background suppression—recommended.
• Specify microphone input volume and speaker output volume.
• Test audio settings.
In situations with loud and irregular background noise, your voice
can become distorted when using noise suppression. If this occurs,
disable noise suppression in the QuickCam
Tip To change your audio settings in the QuickCam
click the Settings
®
software.
®
software,
button, and then click the Audio tab.
QuickCam ® Pro for Notebooks 5