Turning The Bluetooth Function On; Turning The Bluetooth Function Off; Wearing The Headphones - Denon AH-NCW500 Manual Del Usuario

Ocultar thumbs Ver también para AH-NCW500:
Tabla de contenido

Publicidad

Turning the Bluetooth function on

Turn the Bluetooth function on in advance for the Bluetooth
device which is to be connected.
Press and hold the headphones'
Bluetooth button for approx. 1
second.
• A beeping sound will be emitted
and the red and blue LED indicators
will light up simultaneously for
approx. 1 second.
• The power switches on, and the
Bluetooth function switches on.
• Bluetooth
is
automatically
connected if the headphones and
Bluetooth device have already
been paired.
"Pairing with a Bluetooth device
"(vp.3)
n Turning the Bluetooth function off
Press and hold the Bluetooth button for approx. 5 seconds or more.
• A beeping sound will be emitted and the red and blue LED
indicators will light up simultaneously for approx. 1 second.
• The power then switches to a standby status, and the Bluetooth
function switches off.
• If an audio cable is connected to the headphones while the Bluetooth
function is on (power is on), the Bluetooth function automatically
switches off (power switches to standby status).
• Even when in a power standby status, the headphones still consume
a small amount of power.
NOTE
• If the LED indicators don't light up when you press the Bluetooth
button, the battery has been depleted. Please recharge the battery.

Wearing the headphones

Adjust the slider length to fit your head when wearing the headphones.
NOTE
• Please read the attached "Precautions on the use of headphones"
documentation.
• Avoid getting your fingers or other body parts caught in the product's
moving portions.
• Do not pull forcefully on the sliders.
4
Preparation

Publicidad

Tabla de contenido
loading

Tabla de contenido