Phone Calls; Making A Call; Answering An Incoming Call; Ending A Call - Denon AH-NCW500 Manual Del Usuario

Phone calls

Phone calls can be made while wearing the headphones. You can
hear the other caller's voice through the headphones while the built-in
microphone transmits your own voice.
Operates paired Bluetooth-compatible mobile phones using the
headphones' call button.
NOTE
The Bluetooth function will turn off automatically when a device is
connected using the audio cable, and calls using the headphones will
be disabled.
Call button

Making a call

Dial a phone number using the paired mobile phone.
Audio playback will be paused when you make the call.

Answering an incoming call

When an incoming call is detected, audio playback will be paused and
a ringtone will be sounded.
Press the call button one time to answer the call.

Ending a call

During the call, press the call button one time to end the call.
When the call has ended, the paused audio playback will resume.

Using the call waiting function

Use either of the following methods to take an incoming call while a
call is in progress.
NOTE
Certain mobile phones may not support call waiting.
n End the current call and take the new call
When another incoming call is detected while a call is in progress,
press the call button one time.
n Put the current call on hold and take the new
call / switch to the on-hold call
Press and hold the call button for approx. 3 seconds.

Ignoring an incoming call

When an incoming call is detected, press and hold the call button for
approx. 3 seconds to ignore the call.
Switching from headphones to the mobile
phone during a call
Press and hold the call button for approx. 5 seconds or more to switch
from talking through the headphones to talking on the mobile phone
itself.
NOTE
This switching is not possible during the call waiting function. In such
cases, the switching must be performed at the mobile phone.
6

Other operations

Incoming call
Answer
Press call button once
detected
Press and hold call button for
Redial
approx. 3 sec.
In standby
Voice dial /
mode / during
voice-
audio playback Press call button one time
activated call
End call
Press call button one time
Call in progress
Mute on/off
Press call button two times
• Spin the control wheel to adjust the volume level of the other caller's
voice.
• In order to make a call using the headphones, the connected
Bluetooth device must support either HSP (Headset Profile) or HFP
(Hands-Free Profile).*
• In order to make or answer a call during audio playback, the connected
Bluetooth device must support either HSP (Headset Profile) or HFP
(Hands-Free Profile), and must also support A2DP.*
z Refer to the Bluetooth device's owner's manual for information on
supported Bluetooth profiles.