Cequent Performance Products Pro Serie Guia De Inicio Rapido página 2

Please read all instructions carefully before assembly, installation and/or use of this product.
3
Minimum bar spacing = 27-1/2" (700mm)
4
5
6
Cequent Performance Products, Inc.
Plymouth, MI 48170
Roof Top Luggage Box
Product Name:
Product Code:
• If cross bars are adjustable, set to widest
position of 34-1/2" (876mm) center to center of
cross bar.
• This product fits the following cross bar
spacing's:
- 27-1/2" (700mm) Minimum
- 29-1/4" (743mm)
- 31" (787mm)
- 32-3/4" (832mm)
- 34-1/2" (876mm) Maximum
• Slide cross bars forward or backward to line up
holes in cargo box with cross bars.
• Check
clearance.
clearance.
• NOTE: Interference is unavoidable on some
vehicles.
• NOTE: Mount box towards the rear of vehicle
to minimize wind resistance.
• To secure Cargo Box to cross bars, install the
u-bolts around cross bars and through holes
in bottom of Cargo box.
• Place the gasket, clamp block, and clamping
knobs onto u-bolts as shown.
• Firmly hand tighten clamping knobs.
• Apply hole cover labels over remaining
unused holes inside bottom of cargo box.
Page 2
63150
for rear hatch and
Adjust cross bars for proper
63150N Rev A 6-8-11
front hood