Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
LIGHT KIT ASSEMBLY
1.
Line up light brackets (12) with uprights at desired height.
2. Secure to uprights with four 2" bolts and flange nuts.
(See Figure 28)
Figure 28
Flange
Nut
Bolt
3. Place light steel beam (13) at desired depth
underneath brackets. Fasten to brackets with two 4¾"
bolts and flange nuts. (See Figure 29)
Figure 29
4¾"
Bolt
Flange Nut
4. Place two "S" hooks (14) at desired mounting points
along the steel beam and secure with two flange
nuts. (See Figure 30)
Figure 30
PAGE 8 OF 27
OPTIONAL ACCESSORIES CONTINUED
4¾"
Bolt
Steel Beam
Flange Nut
5. Attach hanging chains to LED shop light (11) and
mount to "S" hooks. (See Figure 31)
Figure 31
TABLETOP POWER STRIP ASSEMBLY
1. Choose desired location for power strip (15). Place
two supplied mounting clips roughly 32" apart
(clip side up). Using an electric drill, fasten to tabletop
with two supplied wood screws. (See Figure 32)
Figure 32
2. Secure power strip by snapping into the mounting
clips. (See Figure 33)
Figure 33
0521 IH-8226
Publicidad
Tabla de contenido
