Low Battery; Battery Status; Solar Power Charging Status; How To Use - Anycom Manual Del Usuario

ANYCOM Solar Car-Kit

5. Low Battery

•
The status LED will flash blue and the battery status LED will flash red simultaneously with a periodic beeping sound when the battery status
is lower than 10% out of full charge. In this low battery status, the battery status LED and the status LED will operate simultaneously in the
same way.
•
Charge the battery as soon as the abovementioned status is detected.
•
ANYCOM Solar Car-Kit will turn off when the battery is not charged.

6. Battery Status

•
By pressing
with a beeping sound.
Number of red flashes and
beeps
Talking time

7. Solar Power Charging Status

To check the solar power charging status, you can press
status LED will glow red. (Once the battery is fully charged, the battery status LED will turn off.)
Press for 5 s again to turn off the battery status LED. It is recommended to turn off the battery status LED during the solar power charging. By
doing this, the battery will be charged much faster and more sufficiently.
H
OW TO USE

8. Power On

1. Press and hold
2. You will hear a booting tone and the status LED will briefly flash blue rapidly for 5 times.

9. Power Off

1. Press and hold
2. You will hear a shutdown tone and the status LED will briefly flash blue rapidly for 5 times.
www.anycom.com
and simultaneously and then releasing them briefly, the battery status is indicated by the number of red flashes
4 times
More than 7 hrs
for 5 s when the car kit turned on. If the car kit is receiving sufficient sunlight, the battery
for 2 s.
for 5 s.
3 times 2 times
More than 5 hrs More than 3 hrs
Page 5
1 time
Up to 3 hrs
English