Pairing; Connecting; Auto-Reconnection - Anycom Manual Del Usuario

ANYCOM Solar Car-Kit

10. Pairing

Before using your ANYCOM Solar Car-Kit with mobile phone for the first time, you must pair it with your Bluetooth mobile phone.
(For the detailed set up and pairing instructions with mobile phone, please consult your mobile phone user guide).
1. Begin with the ANYCOM Solar Car-Kit turned off; then, press and hold
2. You will hear two short beeps after the booting tone and the status LED will glow blue steadily
3. Go to the Bluetooth menu in your mobile phone and search for hands-free option. You might need to search for options such as headset,
audio device, etc. in case your mobile phone does not contain the hands-free option; these options, however, are subject to the model of
the mobile phone being used. (Pairing with the hands-free profile is recommended since the user can utilize the various Bluetooth
functions in this profile.)
4. Select "ANYCOM Solar Car Kit" or "ANYCOM SCK" from the list of searched devices.
5. When prompted for a passkey, enter 0000.
6. A beep will sound when the devices are paired successfully.
7. After you have successfully paired your phone and the ANYCOM Solar Car-Kit, you do not need to repeat these steps each time you use
the ANYCOM Solar Car-Kit with your mobile phone.
The ANYCOM Solar Car-Kit will turn off automatically if it stays in the "pairing mode" for over 3 min without being paired to any device. In this case, you
have to reattempt the pairing process (see abovementioned steps). The connection can be made automatically after pairing depending on the features of
different models of mobile phones.

11. Connecting

To use ANYCOM Solar Car-Kit after pairing (or after losing the connection), you should connect it to the paired mobile phone. For more details regarding the
connection method, please refer to the manual of your Bluetooth mobile phone.

12. Auto-Reconnection

1. When ANYCOM Solar Car-Kit turns on:
The ANYCOM Solar Car-Kit will be automatically reconnected without the paring process when the ANYCOM Solar Car-Kit turns on (The
mobile phone connected previously should be within 16 feet / 5 meter range from the car kit).
2. Out of range:
The ANYCOM Solar Car-Kit will be automatically reconnected when it is brought back within a 16 feet / 5 meter range of the phone within 3
min. Please press
- When out of range (greater than 10 m), the connection between ANYCOM Solar Car-Kit and the mobile phone will be
dropped.
- If ANYCOM Solar Car-Kit and the mobile phone have been separated for over 3 min, up to 10 min will be required for
auto reconnection.
- Auto reconnection function might not be activated; this depends on the features of different models of mobile phones.
In this case, please press
www.anycom.com
once briefly to connect it immediately.
once briefly to connect it manually.
down for 5 s.
Page 6
English