Supplement; Troubleshooting; Cautions - Anycom Manual Del Usuario

ANYCOM Solar Car-Kit
S
UPPLEMENT

20. Troubleshooting

In case the ANYCOM Solar Car-Kit does not function correctly, please follow the corrective action given in the table below. If the problem is not solved even
after performing the corrective actions, please contact the dealer from whom ANYCOM Solar Car-Kit was purchased.
Status
ANYCOM Solar Car-Kit does not turn on
Unable to communicate using ANYCOM
Solar Car-Kit
Unable to pair ANYCOM Solar Car-Kit
with a Bluetooth mobile phone
Extremely low or loud speaker volume

21. Cautions

1. Do not drop this unit from a height
2. Do not modify, repair or take apart this unit
3. Do not expose this unit directly to water, alcohol, benzene, etc, for cleaning
4. Do not expose this unit directly to flammables
5. Do not place this unit near flammables
6. Protect this unit from humidity and dust
7. Do not place a heavy object on this unit
www.anycom.com
To Check
Check whether the battery of
ANYCOM Solar Car-Kit is charged
Check whether your mobile phone
supports the "headset" and/or
"hands-free" profile(s)
Check whether the battery is fully
charged
Check whether ANYCOM Solar Car-
Kit is on
Check whether ANYCOM Solar Car-
Kit is in the pairing mode
Check the speaker volume
Corrective Action
Charge the battery
In order to use the ANYCOM Solar Car-Kit, it is essential that your
mobile phone should support the "headset" and/or "hands-free"
profile(s)
(You might need to search for option such as headset, audio
device, etc in case your mobile phone does not contain the hands-
free option; these options however are subject to the model of the
mobile phone being used)
Charge the battery if the battery power is low
Press for 2 s to turn on ANYCOM Solar Car-Kit
With power off, press and hold
ANYCOM Solar Car-Kit in the pairing mode
Press either or
Page 11
for at least 5 s to place
to control the volume accordingly
English