allen+roth LWSET Manual De Instrucciones página 4

ASSEMBLY INSTRUCTIONS
1a. Unpack the unit and confirm that you have all the hardware and
required parts. Assemble the unit on a carpeted floor or the empty
carton to avoid any scratch.
1b. Securely screw four cam bolts (BB) into the designated threaded
inserts on the drawer front panel (D). Fully tighten with a phillips
screwdriver. DO NOT over tighten the cam bolts.
Hardware Used
Cam Bolt
BB
2. Attach drawer side panels (F and G) to the drawer front panel (D) by
engaging four small cam locks (EE).
Hardware Used
EE
Small Cam Lock
3. Slide the drawer bottom panel (C) into the grooves between the
drawer side panels (F and G) until fully rest into the groove of
drawer front (D).
1
BB
x 4
D
2
Grooves line up with each
other and face inward
G
EE
x 4
D
3
C
G
D
6
ASSEMBLY INSTRUCTIONS
4. Fasten the drawer back panel (E) to the drawer side panels (F and G)
with four 38 mm screws (GG).
Hardware Used
GG
M4 x 38 mm Screw
BB
5. Attach the handle (KK) to the front of the drawer front panel (D)
with two handle bolts (JJ).
Hardware Used
JJ Handle Bolt
F
KK Handle
EE
6. Securely screw cam bolts (BB) into the designated threaded inserts
on the top panel (A) and side panels (H and I). Fully tighten with a
phillips screwdriver. DO NOT over tighten the cam bolts.
Hardware Used
Cam Bolt
BB
F
4
GG
E
x 4
G
C
5
JJ
x 2
JJ
x 1
D
6
A
x 8
H
7
GG
F
KK
BB
I