allen+roth LWSET Manual De Instrucciones página 5

ASSEMBLY INSTRUCTIONS
7. Securely screw cam bolts (BB) into the designated threaded inserts
on the legs (M, N, O and P). Fully tighten with a phillips screwdriver.
Hardware Used
BB Cam Bolt
8. Attach the left side panel (H) between the left side legs (M and N) by
engaging four cam locks (AA) and two wood dowels (CC).
Hardware Used
AA
Cam Lock
CC
Wood Dowel
Glue
DD
9. Attach the right side panel (I) between the right legs (O and P) by
engaging four cam locks (AA) and two wood dowels (CC).
Hardware Used
AA
Cam Lock
CC
Wood Dowel
Glue
DD
7
N
x 14
M
P
8
AA
x 4 AA
CC
H
x 2
CC
x 1
N
9
AA
AA
x 4
CC
CC
I
x 2
x 1 O
8
ASSEMBLY INSTRUCTIONS
10. Attach the back panel (B) to the right back leg (O) by engaging two cam
locks (AA) and one wood dowel (CC).
Hardware Used
BB
AA
Cam Lock
CC
Wood Dowel
O
Glue
DD
11a. Attach the center back stretcher (J) to the right side panel
(I) with one cam lock (AA) and one wood dowel (CC).
11b. Attach the center front stretcher (K) to the right front leg (P)
and right side panel (I) with one cam lock (AA) and one wood
dowel (CC).
M
Hardware Used
AA Cam Lock
CC
Wood Dowel
Glue
DD
12. Attach the bottom shelf (L) to the right side legs (O and P)
with two wood dowels (CC).
Hardware Used
P
CC
Wood Dowel
Glue
DD
10
The cam lock holes
are located upward
and face inward
x 2
AA
x 1
CC
x 1
B
11
CC
AA
x 2
K
x 2 CC
J
AA
The cam locks will face
x 1
the floor when the unit
is turned upright
12
CC
x 2
x 1
L
CC
The pilot holes will face
the floor when the unit
is turned upright
9
P
O
P
I
O
P
O