Garland SET 752 G Manual De Instrucciones página 31

The usage of this machine for jobs other than those
for which the machine has been designed, could lead
to dangerous situations.
Use this machine, accessories and all its parts
according to the instruction manual and taking into
account working conditions and working area. The use
of this machine for jobs different to those specified
in the instruction manual can cause dangerous
situations.
Check that all security elements are in good working
order at all times.
Remember user is the responsible of danger and
accidents caused to other people or things. The
manufacturer will not be liable for damages caused
through the incorrect usage of the machine.
The sharp cutting tool is very dangerous. If instructions
are not followed it will result in serious injury.
Keep all parts of your body away from the cutting tool
during operation
Do not overload the machine. Use the machine for its
correct usage. If used correctly the machine will do
the desired job.
Look after the machine. Check that all moving parts
are well aligned and that they are not blocked, that
there are no broken pieces or other conditions that
could affect the proper functioning of the machine.
If this machine is damaged, always repair it before
using it again. Most accidents occur because of poor
maintenance.
Maintain the cutting elements sharp and clean. The
cutting elements if sharp and clean will cut better, do
a better job, have less chance of getting tangled and
easier to control.
Maintain the handles of the machine dry and clean.
Handles that are not clean and dry cause these to
be slippery and a consequent loss of control over the
machine.
If your machine accidentally takes a knock, inspect the
machine carefully. If the blade bends, the cover break
so if you see any other issue that could affect the
functioning of the machine, take the machine to your
nearest after sales service.
Switch off the machine, unplug the spark plug
and make sure the cutting tool is stopped
before carrying out any adjustments to any
part of the machine, refuelling, cleaning ,
transport or storage the machine. Such security
measures reduce the risk of accidental start up.
If the machine starts vibrating in a strange way,
disconnect the machine and examine it. If you cannot
detect why the machine vibrates, take the machine to
your nearest service dealer. Vibrations are always an
indication of a problem to the machine.
Reduce the throttle setting during engine shut down
and, if the engine is provided with a shut-off fuel
valve, turn the fuel off when engine is stopped.
2.5.1. BACK PULL
When the blades contact with a solid object in the
critical zone a dangerous reaction can be produced.
This reaction is denominated backward movement. As
a result, the user could lose control of the hedgecutter
and serious or mortal injuries can be produced.
These forces occur due to an improper use of the
machine and/or because of the incorrect interpretation
of the instruction manual and can be avoided by
following these simple instructions:
31/144
English