Descargar Imprimir esta página

Westfalia 306326600001 Instrucciones De Montaje página 2

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 7
SIARR
06 - 97
PREPARATION
* Remove the trim from the bottom of the boot and the two wing inners.
* Drop the exhaust down.
* Inside the boot locate the 4 punch marks to either side of longitudi-
nals (2 at each side) and drill these holes to a diameter of 10,5mm.
ASSEMBLY
* Line up the back plates B with the 2 drilled holes.
* Trace out the 4 other holes, then drill them to a diameter of 10,5mm.
* Counter drill the holes marked U and X to a diameter of 10,5mm by
opening them up underneath the longitudinals.
* Enlarge the holes marked X to a diameter of 22mm inside the boot.
* Enlarge the hole marked U to a diameter of 22mm beneath the vehicle.
* Position the back plates supplied with spacers
and fastening kits U, V, W and X.
* Position the crosspiece A beneath the vehicle and
fasten it in place using fastening kts U and X.
FINISHING
* Tighten the nuts, bolts and screws to the torques
indicate below and refasten the exhaust.
FASTENING KIT
2 off HM10x120 screws
2 off HM10 nuts
U
2 off CS10 washers
2 off spacers dia. 15x21 lg.90
4 off HM10x25 screws
4 off HM10 nuts
V
4 off CS10 washers
2 off equipement prong (C
/ C
1
4 off HM12x40 screws
Y
4 off HM12 nuts
4 off DEC12 washers
M16
AC8.8
19,5daNm
M12
M16
AC10.9
27,5daNm
M10
M12
AC8.8
8,1daNm
M10
ASSEMBLY INSTRUCTIONS
4 off HM10x120 screws
4 off HM10 nuts
X
4 off CS10 washers
4 off spacers dia. 15/21 lg.90
2 off HM10x25 screws
2 off HM10 nuts
W
2 off CS10 washers
)
2 off 10/22 plain washers
2
2 off HM16x45 screws
Z
2 off HM16 nuts
2 off DEC16 wasers
TORQUES :
AC10.9 11,4daNm
M8
AC8.8
AC8.8
4,7daNm
M8
AC10.9
AC10.9
6,7daNm
FILE : BUREAU\NOTICEDEMONTAGE\SIARR\NDMWESTFALIA\NDM0697-E - FOLIO NDMANG
Type
Type
Approval No.
Tow bar for
FIAT
e11*94/20*00*1638
Multipla
NB : Electrical diagram inside our universal or custom wiring kits.
PLEASE NOTE : (to familiarise yourself with the operating charasteristics refer to the log)
2,3daNm
If this tow bar is fitted in accordance with our recommendations it will give a complete-
3,3daNm
ly satisfaction. We cannot accept any responsability in the event of changes to or
improper use of this item.
306326600001
Max. Total
Max. Total
Max. Verti-
Authori. Weight Towable Weight
cal load
1 930 kg
1 300 kg
Value
D
70 kg
7,62 kN

Publicidad

loading