Hansgrohe AXOR Starck 10402001 Instrucciones De Instalación/Garantía página 4

1 ⅜
4
5⅞"
" - 1 ½
"
"
5 ⅞
English
Rough in
Install ½" NPT female fittings, recessed ⅜" behind
the surface of the finished wall, for the hot and cold
water supplies.
The fittings should be 5⅞" apart on center.
For proper operation of the mixer,
the hot supply must be on the left
and the cold supply must be on the
right.
Install the finished wall. Make sure that the wall is
watertight.
Installation
Wrap the threads on the s-unions with Teflon tape.
Screw the s-unions into the female fittings.
Align the unions so that they are level and are 5⅞"
apart on center.
The end of the s-union should extend 1⅜" - 1½"
outside the surface of the finished wall.