Fan Control; Technical Data - Nederman 591 Serie Manual De Instrucciones

1 Preface
This manual is for the correct installation, use and maintenance of this product.
Read it carefully before using this product or carrying out maintenance.
Replace the manual immediately if lost.
This product has been designed to meet the requirements of relevant EC
directives. To maintain this status, all installation, repair and maintenance work
for this product is to be carried out by qualified personnel using only original
spare parts. Contact the nearest authorized distributor or Nederman for advice
on technical service and obtaining spare parts.
Nederman continuously improves its products' design and efficiency through
modifications, and reserves the right to do so without introducing these
improvements to previously supplied products. Nederman also reserve the right
to, without previous notice, modify data and equipment as well as operating
and maintenance instructions.
2 Notices
This document contains important information that is presented either as a
warning, caution or note. See the following examples:
WARNING! Type of injury.
Warnings indicate a potential hazard to the health and safety of personnel, and
how that hazard may be avoided.
CAUTION! Type of risk.
Cautions indicate a potential hazard to the product but not to personnel, and
how that hazard may be avoided.
NOTE!
Notes contain other information that is important for personnel.
3 Description
3.1

Technical data

Table 3-1: Operation Box
Operation Box
Primary voltage
Line fuse (primary)
Secondary voltage
Phase
Frequency
Transformer
Protection class
Delay time *
Welding current (sensor)
* From completion of welding to fan stop.
Fan Control Series 591
Instruction manual

Fan Control

Fan Control Series 591
110–120 / 220–240 V
max. 10 A
24 V
1~
50 / 60 Hz
30 VA
IP 54
0–5 minutes +– 25 % 1 min. (at delivery)
8–400 A
EN
English
9