Tristar BL-4421 Manual De Instrucciones página 26

Agitator assembly of high-grade stainless steel (4);
MOTOR AND MOTOR BASE
The powerful motor is the heart of the appliance and is designed just for this
Unit. It is completely enclosed within the plastic cover housing (5). The motor
uses a "free-floating"feature to reduce noise and wear. In order to make the
motor work normally, continuously operating time less than 1 min at one time,
and please closely follow the instructions and the quantities recommendations
in this book.
CARE AND CLEANING OF THIS BLENDER
Blender container parts are corrosion resistant, sanitary and easily cleaned.
Before first use and after every use, separate container parts(items 1-6)and
clean thoroughly in warm, soapy water, then rinse and dry well, DO NOT
WASH ANY PARTS IN AN AUTOMATIC DISHWASHER, Periodically check
all parts before reassembly. If the processing blades are stuck or difficult to
turn,DO NOT USE BLENDER, Check by carefully turning the blades in a
counterclockwise direction (opposite edges are sharp).Blades should turn
freely. If the container is dripped or cracked,DO NOT USE BLENDER, Further
use could result in the container breaking during use. When you need take the
blade out, please use the cloth or other similar thing to get it out.
USE OF DAMAGED OR NON-RECOMMENDED PARTS COULD RESULT IN
A SEVERE PERSONAL IN JURY AND/OR DAMAGE TO THE BLENDER.See
next page for proper container assembly an user instructions.
NEVER IMMERSE THE MOTOR BASE IN WATER.Unplug unit. The housing
can be cleaned with a damp cloth. If there is water flow into the unit, the water
will flow out from the water leakpipe .
The motor is permanently lubricated and does not require any additional
lubrication.
CAUTION: Follow these important steps to assemble,tighten,and mount
blender container quickly and correctly, INJURY MAY RESULT IF MOVING
BLADES ARE ACCIDENTALLY EXPOSED.
Do not attempt to place the container on , or remove from the motor
base while the motor is running.
THIS BLENDER DO'S AND DON'TS
DO:

Use only the voltage and frequency as specified on the bottom of the
blender.

Always operate blender on a clean, dry surface to prevent air from
carrying foreign material or water into the motor.
- 26 -