Lagrange GLACONS EXPRESS Manual Del Usuario página 43

When there isn't enough water in the tank to carry
out an additional cycle, the indicator lamp turns
red. The appliance then stops operating. If water is
added in the tank, the indicator lamp goes off and
the appliance restarts.
ProduCtion oF iCe Cubes ___________________
step 1: Preparing the appliance
Always keep the appliance on a flat, dry and unobstructed surface
(leave a space of 15 cm around the appliance).
Remove the ice-tray as well as the cord and the measuring jug if
they are stored inside.
step 2: Filling the tank
Using the measuring jug, fill the tank without exceeding the
maximum level indicated by the arrows and the "FULL" marking.
The capacity of the tank is 1.15 L.
Put the ice-tray back in its place.
step 3: Programming
Connect the appliance correctly to the mains.
Select the size of ice-cubes (small, medium or large) by
successively pressing the SELECTION button.
Press the START button to start the production of ice cubes.
42