Operating The Appliance; Switching On; Power Mode; Powersharing Mode - Caso Vario Power 3400 Magenta Manual Original

14.4 Operating the Appliance

14.4.1

Switching On

• Plug the power plug into a suitable outlet.
• The temperature of the cooker plate surface displayed: is the
temperature of the surface of the induction cooker lower than 50°C,
the display shows „L". When the temperature of the cooker plate
surface is over 50 °C, it is displaying „H". An acoustic signal sounds.
Now the device is in standby mode.
• Place a suitable cooking pot with its contents to be cooked on the
centre on the hob (Ø 120 mm - 260 mm).
• Now press the On/Standby switch 1 to turn on of the two induction
hotplates on. The control lamp "Power" and "Temp" blink and an
acoustic signal sounds.
► When the device heats up in operation due to the pot, the colour of the
glass ceramics can get a little bit darker.
► After cooling down, the glass ceramics is in its original colouring.
14.4.2

Power Mode

• Press the Function Key 3. The preset power stage "8" is selected and
the device turns on.
• With the + / - Keys (5+6), you can change the settings at any time in a
range from 1 – 12.
► We recommend to select the function "Power Mode" in case of
steaming food or boiling water for example. So the overheating
protection "E05" will not be activated.
14.4.3

Powersharing Mode

• • If both induction fields are operated, the boards will share over power
sharing function levels as follows:
left
right
caso Vario Power 3400 Magenta
Please note
12 11 10 9 8
5 6 7 8 9
7 6 5 4
10 11 12 12
3 2 1
12 12 12
47