Signal Tones; Overheating Protection Facility; Rating Plate; Operation And Handing - Caso Vario Power 3400 Magenta Manual Original

13.1.3

Signal Tones

The appliance emits an acoustic signal after being switched on and in the
event of a fault.
► The acoustic signal continues to sound until the fault has been rectified
or the appliance has been switched off.
You will find more detailed information on error messages in the chapter
entitled „Fault indications".
13.1.4

Overheating Protection Facility

The appliance is equipped with an overheating protection facility. If the
temperature of the appliance exceeds the critical limit the appropriate error
message is displayed and an acoustic signal sounds. For safety reasons
the appliance shuts off further power supply. After the cooling-down phase
the appliance can be switched off and then back on again.
► The acoustic signal continues until the fault has been rectified or the
appliance has been switched off.
You will find more detailed information on error messages in the chapter
entitled „Fault indications".
13.1.5

Rating plate

The rating plate with the connection and performance data can be founded
on the back of the device.

14 Operation and Handing

This chapter provides you with important notices with regard to operating
the device. Observe the following notices to avoid dangers and damages:
► Do not leave the device unsupervised when it is in operation, so that
you can intervene quickly in the event of dangers.
caso Vario Power 3400 Magenta
Please note
Please note
Warning
44