Putting Into Operation - Velux INTEGRA DSL Manual De Instrucciones

Declaration of Conformity
In accordance with the European Parliament and Council
Directive 2006/42/EC
We herewith declare that the VELUX INTEGRA
products DSL, RSL, FSL and FSC (model no. BE-IA002-03)
- are in conformity with the Machinery Directive 2006/42/EC, the EMC
Directive 2014/30/EU, the Low Voltage Directive 2014/35/EU and the
Radio Equipment Directive 2014/53/EU and
- have been manufactured in accordance with the harmonised standards
EN 55014-1(2006)+A1(2009)+A2(2011), EN 55014-2(2015),
EN 55024(2012), EN 55032(2015), EN 60335-1(2012),
EN 60335-2-97(2015), EN 62233(2008), EN 300220-2 v2.4.1(2012)
and EN 301489-3 v1.6.1(2013).
When one of the above-mentioned solar products is installed on a
VELUX roof window in accordance with the instructions and require-
ments, the total system complies with the essential requirements of the
Directives 2006/42/EC, 2014/30/EU, 2014/35/EU and 2014/53/EU of
the European Parliament and Council.
VELUX A/S: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
(Jens Aksel Thomsen, Market Approval)
Ådalsvej 99, DK-2970 Hørsholm. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4 VELUX ®
solar sunscreening
®
14-07-2016
CE DoC 932882-03
ENGLISH

Putting into operation

A
Read directions for use carefully before operating and retain
for future reference.
Please also see Declaration of Conformity and Important
information.
Do not operate the solar product until it has been installed.
Note: If the product does not react when the remote control
is operated, the product has not been registered in the remote
control during installation. To register the product, press
button on product for 10 seconds (motor makes a brief buzzing
noise, but the product does not move) (1). Remove strip from
remote control if not already removed (2) and press RESET
button on the back of the remote control briefly (1 second)
with a pointed object (3).
Then adjust motor to size of window by pressing the STOP key
(4) and subsequently the DOWN key (5) on the remote control
within 3 seconds. Do not interrupt the adjustment! Once the
adjustment is completed, the product has been registered in
the remote control and is ready for use.
ENGLISH
VELUX ® 5