Disassembly - Cecilware MT-1P-UL Manual De Instrucciones

5. 3. 1 DISASSEMBLY

ATTENTION
Before any disassembly and/or cleaning procedure
make sure that the dispenser is disconnected from its
power source.
1 - Remove cover from the bowl.
2 - Remove the bowl by lifting its faucet side up and off the
fastening hooks (see figure 5) and slide it out (see figure
6).
3 - Slide the outer spiral out (see figure 7) and then the inside
figure 5
figure 6
auger (see figure 8).
figure 7
figure 8
MT UL
7