Technical Data; Safety Instructions; Symbols And Icons - FLORABEST FLS 3000 B2 Traducción Del Manual De Instrucciones Original

GB IE

Technical data

3-in-1
Electric Leaf Blower ..... FLS 3000 B2
Rated input
voltage U ................ 230 - 240 V~, 50 Hz
Rated power P .......................... 3000 W
Idling speed n ..........8000 - 14000 min
0
Air speed ........................max. 280 km/h
Air suction volume ............max.14 m
Chopping rate ................................ 15:1
Collection bag ................................ 45 L
Protection class ................................
Protection category...........................IP20
Weight ........................................3.9 kg
Sound pressure level
(L ) .................. 88.7 dB (A); K
pA
Sound power level (L
guaranteed ........................ 103 dB(A)
measured ....... 100,4 dB(A); K
Vibration (a )
h
handle ..............2.35 m/s
auxiliary handle 1.18 m/s
Noise and vibration values have been
determined according to the standards and
regulations mentioned in the declaration of
conformity.
The stated vibration emission value was
measured in accordance with a standard
testing procedure and may be used to com-
pare one power tool to another. The stated
vibration emission value may also be used
for a preliminary exposure assessment.
Warning: The vibration emission
value may differ during actual use
of the power tool from the stated
value depending on the manner in
which the power tool is used.
Safety precautions aimed at protect-
ing the user should be based on
estimated exposure under actual
24
/min
3
= 3 dB
pA
)
WA
= 3 dB
WA
; K=1.5 m/s
2
; K= 1.5 m/s
2
usage conditions (all parts of the
operating cycle are to be consid-
ered, including, for example, times
during which the power tool is
turned off and times when the tool
is turned on but is running idle).

Safety instructions

-1
This section describes the basic
safety rules when working with the
device.
II

Symbols and icons

Symbols on the appliance
Warning!
Read the manual.
Danger due to materials
2
blown out of machine!
2
Remove persons in the
vicinity from the danger
area.
Caution.
Rotating impeller wheel.
Keep hands away.
Remove the power plug be-
fore maintenance and repair
work.
Remove the plug from the
mains. Immediately if the
cable is damaged or cut.
For saftey reasons, make sure
that the safety cover over the
suction opening is securely
mounted!