Technical Specifications; Safety Instructions - Fermax CM-204 Manual De Instrucciones

TECHNICAL SPECIFICATIONS

Power supply
Consumption
Audio output power
Output impedance
Call signal
Wiring required
Type of wire depending on effective distance
AWG
Diameter
Cross Section
Distance
Dimensions and weights
CM-204
CM-206
CM-211
CM-200

SAFETY INSTRUCTIONS

• To prevent risk of electrical shock, do not open the equipment or expose it to
water or moisture.
• The equipment must be installed in such a way that its ventilation is not obstructed.
For example, it must not be placed behind a sofa, cupboard or any other place where
the ventilation slots are blocked.
• Metallic objects must not be inserted in the ventilation grids.
• Do not install near heat sources (kitchen, radiators,etc.) or damp places
(bathroom, swimming pool, kitchen sink, etc.)
• If the equipment is not going to be used for a long period, it should be unplugged.
24 AWG
0.5 mm
0.21mm
2
120 m
WEIGHT (gr)
432.4
671.6
690
308
2 wires between central and secondary
22 AWG
0.65 mm
0.33mm 0.52mm
2
200 m
WIDTH LENGTH
170 mm 155 mm
255 mm 155 mm
255 mm 155 mm
170 mm 155 mm
Electronic call tone
20 AWG 18 AWG
0.8 mm 1.00 mm
0.83mm
2
300 m
12 Vdc
300 mA
900 mW
8 ohms
2
480 m
HEIGHT
55 mm
55 mm
55 mm
55 mm