Universal Holding Frame (Vag/Mercedes/Fiat/Psa/Renault) - WABCOWÜRTH W.EASY ADAS Calibration Manual

4.3.2 Universal holding frame (VAG/Mercedes/Fiat/PSA/Renault)

Required accessories (not included in scope of delivery):
- Calibration board (target) VAG + MB (Art. No.: WW01 000 670)
- Calibration board (target) FCA + Alfa (Art. No.: WW01 000 672)
- Universal holding frame for van calibration boards (Art. No.: WW01 000 661)
The following steps are required to mount the universal holding frame on the W.EASY ADAS Calibration device.
1. Screw the mounting fixture into the carrier plate
2. The universal frame is supplied with two white and two black knurled
nuts as well as a white and a black fixing magnet.
3. Depending on the basic colour of the board (VAG black, Mercedes-Benz white), the matching colour
fastenings are to be used.
4. When inserting the boards, ensure that the knurled screws are in the correct position.
5. The target must also be secured with the magnetic holder.
6. Note the extension width of the measuring laser.
Universal holding frame for vans
18