12
Special features
Component
DC-IN (19V)
Security lock slot
Computer lock switch
❖ Certain USB devices, such as optical disc drives and hard disk
❖ If your USB device came with an AC adaptor, be sure to connect
❖ Booting from a USB 3.0 port is only available if your computer
❖ The speed of the USB 3.0 port on the port replicator is
Special features
The port replicator supports the following power-saving features, if
they are available on your computer. Refer to your computer
documentation for details.
Feature
Wake On LAN
Wake Up (USB)
Description
Socket for AC adaptor.
Attachment point for an optional security cable
(not included) used to deter theft.
In the locked position, helps prevent disconnection of the
computer from the port replicator.
Note: When the Computer lock switch is in the locked
position, the Eject lever cannot be operated.
drives, have high power requirements. Due to the power output
limitations of the USB ports, you may not be able to operate
more than one such device at a time.
the device to a power outlet with the AC adaptor, in addition to
connecting the device to the port replicator with a USB cable.
supports it.
dependent on your computer's specifications.
Purpose
When a computer in sleep or hibernation mode is connected to
the port replicator, this feature turns on the computer when a
wake-up signal is received from a connected LAN cable.
When a computer in sleep or hibernation mode is connected to
the port replicator, this feature turns on the computer when a
wake-up signal is received from a device connected to a USB
port.
Note: When the Wake Up (USB) feature is enabled and the
docked computer is in sleep or hibernation mode, the
computer' s AC power light may be ON or OFF, depending on the
computer model. In either case, the computer will turn on when
a wake-up signal is received from a USB device.