Operating Concept; Care Instructions - geberit Xeno2 Manual Del Usuario

Operating concept

Setting the lighting strips
1
Use the two outer sensors to switch the light
strips on or off.

Care instructions

You have selected a product with a high-grade surface. Please follow the care instructions below.
The manufacturer does not assume any liability for product damage that arises as a result of incorrect care
and handling.
General care instructions
• Never use cleaning agents that contain chlorine or that are acidic or corrosive.
• Never use cleaning agents that are abrasive or may scratch the surface.
• Never use sharp or pointed objects when cleaning.
• Make sure that an efficient source of ventilation and an appropriate room temperature are present in your
bathroom.
• Protect the surface from bleaching due to extreme light and sun exposure.
Care instructions for mirror surfaces
Please note the following when cleaning mirror surfaces:
• Use a damp chamois leather or a soft, lint-free cloth.
• Remove drops from the edges of mirror surfaces immediately.
Cleaning surfaces
1
Clean the surfaces. Please follow the
corresponding care instructions.
2
Dry the surfaces with a soft, lint-free cloth.
54043199773907467-1 © 07-2020
968.609.00.0(01)
2
Use the two inner sensors to make the light
strips brighter or dimmer.
EN
7