Special Safety Instructions - Rothenberger RODIA DRY CLEANER 1200 Instrucciones De Uso

Regularly check extension cords and replace them if they are damaged. Keep the handles
dry, clean and free of oil and grease.
15 Pull the plug from the socket. When not using the electric tool, before maintenance or
when changing tools, such as saw blades, drills and cutting bits.
16 Do not leave any tool keys inserted. Before switching on, check to see that keys and ad-
justment tools have been removed.
17 Avoid unintentional activation. When plugging the tool in, make sure that the switch is
turned off.
18 Use outdoor extension cords. When outdoors, use only extension cords that are approved
and appropriately marked.
19 Be alert. Pay attention to what you do. Approach your work sensibly. Do not use the electric
tool when you are distracted.
20 Check the electric tool for damage. Before using the electric tool, you must inspect safety
equipment or slightly damaged parts carefully to ensure that they work properly and as in-
tended. Check to see that the moving parts operate freely and don't stick, and to make sure
no parts are damaged. All parts must be mounted properly and meet all the conditions for
ensuring trouble-free operation of the electric tool.
Damaged safety equipment and parts must be properly repaired or replaced by a profes-
sional facility, unless otherwise indicated in the user manual. Damaged switches must be
replaced by a customer service facility.
Never use an electric tool whose switch cannot be turned on and off.
21 Caution. Using other insertion tools and accessories may cause injury.
22 Have your tool repaired by an electrical expert. This electric tool meets applicable safety
requirements. Repairs must be made only by an electrical expert using original replacement
parts. Otherwise accidents many occur.
1.3

Special safety instructions

Danger of suffocation! Keep packaging material such as plastic bags away from
children.
Never stand or sit upon the vacuum device.
Particular caution is advised when ascending stairs. Pay attention to standing safely.
Do not pull the suction hose and connection line over sharp edges, kink it or shut it.
Always lay the suction hose and connection line so that nobody may trip over them.
In case of any leakage of foam or liquid, immediately switch off the vacuum device.
Always keep dry the inside of the lid.
Do not start the vacuum device including its accessories if:
- the vacuum device shows detectable damage (fissures/cracks),
- the power connection line is defective or shows fissuring or ageing; or,
- any invisible defect is suspected (after a fall).
Do not allow the rotating brushes to get into contact with the power connection line.
Do not operate the vacuum device where there is danger of explosions.
Keep away the vacuum device from inflammable gases and substances.
Do not aspirate any combustible or explosive solvents, materials soaked in solvents,
explosive dusts, liquids such as petrol, oil, alcohol, diluents or materials hotter then
60 °C (140 °F). Otherwise there will be danger of fire and explosions!
Have repairs been made only by experts, e. g. the producer's service. Use original
spare parts only.
Improperly repaired devices pose a hazard for the user.
Use the socket of the vacuum device only for the purposes defined in the instruction
manual.
In case of any inappropriate usage, improper operation or repair, the producer shall
All manuals and user guides at all-guides.com
ENGLISH 15