Sinbo SK 7335 Manual De Instrucciones página 9

of heat insulation. The LED light will be shinning with red light, while after the water boils the
kettle will keep the water temperature for 2 hours with the indicator light shinning. During the
2 hours heat insulation function running, it will go on heating when the temperature arrives at
85 C
2. Press "
"for once, we can see the indicator light of 60 C shines with the green LED light
.It means that it will stop heating when the water temperature is 60 C.
Press " "for twice, we can see the indicator light of 70 C shines with the blue LED light. It
means that it will stop heating when the water temperature is 70C.
Press " "for 3 times we can see the indicator light of 80 C shines with the yellow LED light.
It means that it will stop heating when the water temperature is 80 C
Press " "for 4 times we can see the indicator light of 90 C shines with the purple LED light.
It means that it will stop heating when the water temperature is 90 C
4. After the use finished.please put plug off the power socket.
HOW TO CARE FOR YOUR KETTLE
Wipe the exterior of the kettle with a soft.damp cloth or sponge.Remove stubborn spots with
a cloth moistened with mild liquid detergent.Do not use abrasive scouring pads or powers.
Never immerse the kettle in water or other liquids.
From time to time.depended on the nature of your water supply.a boiled scale deposit is naturally
formed and can be found mostly adhered to the heating element.thus reducing the heating
efficiency.
The amount of boiled scale deposited.and subsequently the need to clean or rescale.largely
depends on the water hardness in your area the frequency with which the kettle is used.
Boiled scale is not harmful to your health.But if poured into your beverage.it can give a powdery
taste to your drink.Therefore.the kettle should be descaled periodically as indicated below
DESCALING
Descale kettle regularly.With normal use.at least twice a year
1. Fill the kettle up to "max" with a mixture of one part ordinary vinegar and two parts water.Switch
on and wait for the appliance to switch off automatically.
2. Let the mixture remain inside the kettle overnight.
3. Discard the mixture the next morning.
4. Fill the kettle with clean water up to "max" mark and boil again.
5. Discard the boiled water to remove any remaining scale and vinegar.
6. Rinse the inside of the kettle with clean water.
- 8 -