Protecting The Environment - Black and Decker GL420 Manual De Instrucciones

E N G L I S H
Tool runs slowly
Check that the spool housing can rotate freely.
x
Carefully clean it if necessary.
Check that the cutting line does not protrude
x
more than 9 cm from the spool housing.
If it does, cut it off so that it just reaches the
line trimming blade.
Automatic line feed does not work
Keep the tabs depressed and remove the
x
spool cover from the housing.
Lift the spool approx. 6 mm and pull the
x
cutting line until it protrudes 9 cm from the
housing. If insufficient cutting line is left on
the spool, install a new spool of cutting line as
instructed above.
Push the spool back into place and rotate it
x
slightly until it is seated.
Align the tabs on the spool cover with the
x
holes in the housing.
Push the cover onto the housing until it snaps
x
securely into place.
If the cutting line protrudes beyond the trimming
x
blade, cut it off so that it just reaches the blade.
If the automatic line feed still does not work or the
spool is jammed, try the following suggestions:
Carefully clean the spool cover and housing.
x
Remove the spool and check if the lever (20)
x
can move freely (fig. D).
Remove the spool and unwind the cutting line,
x
then wind it on neatly again as described
above. Replace the spool as instructed.

PROTECTING THE ENVIRONMENT

Black & Decker provides a facility for
recycling Black & Decker products once
they have reached the end of their
working life. This service is provided free
of charge. To take advantage of this
service please return your product to any
authorised repair agent who will collect
them on our behalf.
10
You can check the location of your nearest
authorised repair agent by contacting your local
Black & Decker office at the address indicated in
this manual. Alternatively, a list of authorised
Black & Decker repair agents and full details of our
after-sales service and contacts are available on
the Internet at: www.2helpU.com
GUARANTEE
Black & Decker is confident of the quality of its
products and offers an outstanding guarantee.
This guarantee statement is in addition to and in
no way prejudices your statutory rights.
The guarantee is valid within the territories of the
Member States of the European Union and the
European Free Trade Area.
If a Black & Decker product becomes defective
due to faulty materials, workmanship or lack of
conformity, within 24 months from the date of
purchase, Black & Decker guarantees to replace
defective parts, repair products subjected to fair
wear and tear or replace such products to ensure
minimum inconvenience to the customer unless:
The product has been used for trade,
x
professional or hire purposes;
The product has been subjected to misuse or
x
neglect;
The product has sustained damage through
x
foreign objects, substances or accidents;
Repairs have been attempted by other persons
x
than authorised repair agents or Black & Decker
service staff.
To claim on the guarantee, you will need to
submit proof of purchase to the seller or an
authorised repair agent. You can check the
location of your nearest authorised repair agent by
contacting your local Black & Decker office at the
address indicated in this manual. Alternatively,
a list of authorised Black & Decker repair agents
and full details of our after-sales service and
contacts are available on the Internet at:
www.2helpU.com