Setting Up The Device; Operation; Modes Of The Device; Clock Mode - Auriol HG00151 Instrucciones De Utilización Y De Seguridad

Setting up the device

You can set up the device on horizontal, flat surfaces, by folding
the stand downwards (see Fig. B). Alternatively, you can use
11
the magnet
13

Operation

Q 

Modes of the device

The digital time has two modes, which are displayed at the top of
the display
1
Press the CLOCK (TIMER) key
between the Clock and Timer modes.

Clock mode

In Clock mode, the time is shown in the top field of the display
The bottom two fields show the stopwatch time (Fig. C).
Setting the time
In Clock mode, press and hold down the CLOCK (TIMER) key
for 3 Seconds. The top field of the display
5
28 GB/IE
to fasten the device to magnetic surfaces.
.
to switch back and forth
5
1
flashes.
1
.