Worx WX283 Manual Original página 8

WARNING: To be accurate, an estimation of exposure level in the actual conditions of use
should also take account of all parts of the operating cycle such as the times when the tool
is switched off and when it is running idle but not actually doing the job. This may significantly
reduce the exposure level over the total working period.
Helping to minimise your vibration exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep well lubricated (where
appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Avoid using tools in temperatures of 10
Plan your work schedule to spread any high vibration tool use across a number of days.
ACCESSORIES
1.3Ah lithium battery pack
Charger
2" Driver bits
Hex shank drill bits
10mm detachable keyless chuck
We recommend that you purchase your accessories from the same store that sold you the
8
tool. Use good quality accessories marked with a well-known brand name. Choose the type
according to the work you intend to undertake. Refer to the accessory packaging for further
details. Store personnel can assist you and offer advice.
3 in1 drill/driver/impact driver
C or less.
0
WX283
1
3-5hr
2
2
1
WX283.3 WX283.9
1
30min
2
2
1
/
/
2
2
1
EN