Teac SR-L35 Manual Del Usuario página 11

To check the programmed order
In the stop mode, press the MEMORY/CLOCK ADJ
button repeatedly to show the track numbers that
have been stored in memory.
To add a track to the end of the program
In the stop mode, press the MEMORY/CLOCK ADJ
button repeatedly until "00" appears on the
display.
Select a track number by pressing the SKIP/SEARCH
button, and then press the MEMORY/CLOCK ADJ
button.
The track is added to the end of the program.
To overwrite the program
In the stop mode, press the MEMORY/CLOCK ADJ
button repeatedly until the track number to be
changed appears on the display.
Select a track number by pressing the SKIP/SEARCH
button, and then press the MEMORY/CLOCK ADJ
button.
MEMORY/CLOCK ADJ
.m,/
STOP
To cancel the program playback mode
Press the STOP (H) button. "MEMORY" indicator
disappears, but the programmed contents aren't
lost.
To return to the program mode, press the
MEMORY/CLOCK ADJ button.
To clear program
In the stop mode, do either of the following to
clear the program:
< Press OPEN/CLOSE button (L) on top of the unit to
open the CD compartment.
< Press the MEMORY/CLOCK ADJ button and then
the STOP (H) button.
< If the unit is disconnected from the power supply
for more than 3 minutes, the programmed
contents will be cleared.
11