Listening The The Extenal Sources; Sleep Timer - Teac SR-L35 Manual Del Usuario

Listening to the External Sources
1
You can connect an external source such as a portable
player to the AUX IN jacks.
1
Press the STANDBY/ON switch to turn the unit
ON.
2
Press the FUNCTION button repeatedly to
select "AUX".
How to connect external sources
< Read instructions of each component you intend to
use with the SR-L35.
Connect the component with an audio cable.
< Make sure to connect:
white plug w white jack (L: left channel)
red plug w red jack (R: right channel)
< Use L-shaped pin plugs for connecting into the AUX
IN jacks if you are using the unit on a table or other
flat surface.
< Be sure to insert each plug securely. To prevent hum
and noise, do not bundle the connection cords with
the power cord.
2
Portable Player, etc.
AUDIO OUT
(PHONES)

Sleep Timer

TIMER/SLEEP
The unit automatically switches from power on to
standby at a specified time.
When the power is on, press the TIMER/SLEEP
button repeatedly until the desired time appears on
the display.
Use the SLEEP button when using the remote
control unit.
The sleep time can be changed at 10-minute
intervals.
90 80
70
When the sleep timer is activated, "SLEEP"
appears on the display.
< To cancel the sleep timer, press the SLEEP button.
10 (OFF)
15