• Unplug it from the socket-outlet.
• Remove the container from the power supply base.
How to heat milk (MAX level
• Remove the lid.
• Remove the whisk (2) from the support (5) on the bottom of the container.
• Fill with milk to the level indicated by MAX
• Place the lid on the container stably.
• Place the container on the power supply base.
• Plug into the mains socket.
• Switch on the appliance: move the switch-on slider to the right in position "1". Release the slider.
The slider will return back to position "0". The light (6) turns on. After 2 minutes, the milk is hot
and the appliance turns off automatically. To stop the operation at any time, move the slider back
to position "1" and release it.
• Unplug it from the socket-outlet.
• Remove the container from the power supply base.
Function
To prepare frothed milk
To heat milk
Protection from overheating
If the appliance is turned on empty, without milk, after about 30-40 seconds it will turn off automati-
cally to protect it from overheating.
Appliance switching off
To turn off the appliance, unplug the power cord from the power outlet.
CLEANING THE APPLIANCE
Warning!
All cleaning operations described below must be performed with the machine off and with the
electric plug disconnected from the socket-outlet.
amount of time. Do not wash the appliance and its components in the dishwasher. Do not
All operations must be performed when the machine is cold.
• Wash the lid (1) and the whisk (2) with hot water and washing-up liquid.
• Wash only the inner part of the container (3) with hot water and washing-up liquid.
)
.
Using the whisk
Milk level
Filling
Up to the MAX
level
Up to the MAX
level
11