Reference Measurement - LaserLiner DistanceMaster 80 Manual De Instrucciones

Pythagoras function 2:
Pythagoras 2
The 2nd measurement takes place with automatic Min/Max function.
min/max continuous measurement:
The LC display shows the max value, the min value and the current value.

Reference measurement:

Reference length
4. Slow beeping:
The measurement is within ± 100 mm of the reference value.
Rapid beeping:
The measurement is within ± 1 mm of the reference value.
1.
1x 2x 3x
Press for 3 seconds
then release button
3 sec
1x
1a. Number 1b. Number 2. Define reference
selection
reference
DistanceMaster 80
2. 3. measurement
4x 5x
Set reference length
set-up
3. Now move the laser
90°
forward and back.
stop
1x
result
height
6x
stop
2x
value
1x
GB
15