Onkyo UP-A1 Manual De Instrucciones página 7

UP-A1.book Page 7 Thursday, March 26, 2009 10:51 AM
Remove case (if fitted)
Notes:
• Remove the case, if fitted, from your iPod or
iPhone before inserting it into the UP-A1. Other-
wise, a poor connection may result in no sound or
remote control issues.
• To prevent damage to the dock connector, don't
twist your iPod or iPhone when inserting or
removing it, and be careful not to knock over the
UP-A1 while your iPod or iPhone is inserted.
• Don't use the UP-A1 with any other iPod or iPhone
accessories, such as FM transmitters and micro-
phones, because they may cause a malfunction.
Troubleshooting
❑ There's no sound
• Make sure your iPod or iPhone is playing.
• Make sure your iPod or iPhone is inserted properly
in the UP-A1.
• Make sure your AV receiver is turned on, the cor-
rect input source is selected, and the volume is
turned up.
• Make sure all plugs are pushed in all the way.
❑ FM/AM radio is noisy
• If there's any noise when listening to FM/AM radio
on your tuner or receiver, try moving the antenna
cable away from the UP-A1 and iPod or iPhone.
Also, keep the antenna cable away from other
cables.
Specifications
Weight: 170 g
Dimensions (W x H x D): 83 x 33 x 74 mm
7
En-