Proline GR800 Manual De Instrucciones página 14

To attach the supplied drain hose to the drainage point:
1. Remove the rubber plug from the bottom drainage point.
2. Fix the bracket on the lower air inlet grille with the supplied screw.
3. Screw one end of the drain hose over the drainage point and then clip it with the hose clamp.
4. Fix the drain hose in the bracket. Clip it with the hose clamp and attach the rubber plug to the other end
of the drain hose.
To empty the water tank do the following:
1. Switch off the appliance and remove the plug from the mains socket.
2. Place a water tray on the floor underneath the bottom drainage point.
3. Remove the rubber plug from the drain and let the water run out.
12