Setting The Clock - Onkyo CR-245 Manual De Instrucciones

Setting the Clock

Setting the Clock
TIMER
F/H
ENTER
1 Press the [TIMER] button repeatedly until
"Clock" appears.
C„ „ l o„ „ c k„ „ „ „
2 Press [ENTER].
3 Use the arrow []/[] buttons to enter the
current hour.
When the CD receiver is shipped from the factory,
the time display format is set to 12-hour time. Set
the current hour as it would appear in 12-hour time.
If you want to set the current hour as 24-hour time,
press the [DISPLAY] button.
4 Press [ENTER].
5
Use the arrow []/[] buttons to enter the
current minute.
6 Press [ENTER].
The clock is set and the second dot starts flashing.
28
En-
CLOCK
CALL
DISPLAY
„ „
„ „ „ „ - -„ „ : „ „ - -„ „
„ „ „ „ 7„ „ : „ „ 0 0„ „ a m
„ „ „ „ 7„ „ : „ „ 0 3 ... „ a m
Displaying the Time
To display the time, press the remote controller's
[CLOCK CALL] button. Press the button again or
perform another operation to cancel the time display.
If the CD receiver is on Standby, the time will be
displayed for 8 seconds.
While the CD receiver is on, the time is displayed
continuously.
Change the time format
To change the time format between 12-hour and 24-hour,
press the [DISPLAY] button.