Tabla de contenido
Publicidad
6 Navigating the SMT (System Management Terminal) Interface
The SMT is the interface that you use to configure your Prestige. Several operations that you should be familiar with
before you attempt to modify the configuration are listed in the following table.
OPERATION
Move down to
another menu
Move up to a
previous menu
Move to a
"hidden" menu
Move the cursor
Enter information
Required fields
N/A fields
Save your
configuration
Exit the SMT
Table 4
KEYSTROKES
[Enter] key
[Esc] key
Press [space bar]
to change No to
Yes then press
the [Enter] key
[Enter] key or
[Up]/[Down] arrow
keys
Fill in, or
Press [space bar]
to toggle
<?>
<N/A>
[Enter] key
Type 99, then
press the [Enter]
key.
Main Menu Commands
To move forward to a submenu, type in the number of the
desired submenu and press the [Enter] key.
Press the [Esc] key to move back to the previous menu.
Fields beginning with "Edit" lead to hidden menus and have a
default setting of No. Press the [space bar] to change No to
Yes, then press the [Enter] key to go to a "hidden" menu.
Within a menu, press the [Enter] key to move to the next field.
You can also use the [Up]/[Down] arrow keys to move to the
previous and the next field, respectively.
You need to fill in two types of fields. The first requires you to
type in the appropriate information. The second allows you to
cycle through the available choices by pressing [space bar].
All fields with the symbol <?> must be filled in order to be able
to save the new configuration.
Some of the fields in the SMT shows <N/A>. This symbol refers
to an option that is Not Applicable.
Save your configuration by pressing the [Enter] key at the
message [Press ENTER to confirm or ESC to cancel]. Saving
the data on the screen takes you, in most cases, to the
previous menu.
Type "99" at the Main Menu prompt and press the [Enter] key to
exit the SMT interface.
Quick Start Manual for Prestige 100L
DESCRIPTION
7
Publicidad
Tabla de contenido
