Zyxel Prestige 100L Manual De Inicio Rápido página 21

9 IDSL Setup
This section describes how to configure the IDSL using Menu 2 – WAN Port Setup. From the Main Menu, enter 2
to open Menu 2.
Press Space Bar to Toggle
The following table contains instructions on how to configure your IDSL setup.
FIELD
Since the Prestige can only act as an IDSL Client, there is only one
Service Type
option available: IDSL Client.
B Channel There are three options available: Leased 128K or Leased 64K,
Usage which is used to decide the IDSL line's speed; or Switch 64K for
Ascend MAX TNT IDSL-module. When the P100L is connected to
the P1600 as the Client router, then this option cannot be set by
the user as it is set on the P1600.
10 Ethernet Setup
Menu 2 – WAN Port Setup
Service Type: IDSL Client
B Channel Usage = Leased 128K
Press ENTER to Confirm or ESC to Cancel:
Figure 8
Table 7
1. General Setup
2. TCP/IP and DHCP Setup
Enter Menu Selection Number:
Figure 9 Menu 3 – Ethernet Setup Screen
Menu 2 – WAN Port Setup
IDSL Setup Menu Fields
DESCRIPTION
Menu 3 – Ethernet Setup
Quick Start Manual for Prestige 100L
EXAMPLES
IDSL Client
Leased 128K /
Leased 64K /
Switch 64K
11