Denver CRL-300 Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 86
• When you finish the alarm setting, you can select the best way to waking up natural sounds, the classical buzzer or
the selected radio station. Use the RADIO / SOUND button to do the selection.
• Please notice, the natural sounds / melodies will sound for approximately 1 minute, then take a short brake at
approximately 1 minute, and then play for 1 minute again. There are 4 natural sounds, and 6 beeper sounds /
melodies.
• The alarm rings each 24h all the week. If you want to cancel the alarm you have to deactivate it.
2.2.
Turn on / off the alarm
When finished the alarm time setting, the alarm is activated and the icon
• In the time display mode, If you want to turn off the alarm function, press ALARM to enter alarm mode and the
flash, then press AL ON / OFF, the icon
and the icon
will be not shown.
• When the alarm is off, the icon
press ALARM to enter alarm mode and the
ALARM again to exit the alarm mode, the alarm is on and the icon
3. Preset light on (Sunrise)
• The "SUNRISE" mode is when the light of the unit start with a gradual intensity increase. It turns itself up before the
alarm clock rings and gradually brightens up during the period time you set.
• To activate the "SUNRISE" mode we have to press the MODE button and then the SET button. Using SNOOZE and
DOWN / 12 / 24 you can set the timing that you want, having 00, 15, 30, 45, 60 and 90 minutes as option.
When you choose the 00 option, means that the "SUNRISE" mode is off. In the display you can see
that the "SUNRISE" mode is activate.
4. "SUNSET" time setting
• The "SUNSET" mode is when the light and / or radio turn itself down until it is off.
• To activate the "SUNSET" mode you have to press the MODE button two times and then the SET button to program it.
Using the SNOOZE and DOWN / 12 / 24 buttons you can adjust the timing, using the options 00, 15, 30, 45, 60 and 90
minutes.
When the option is 00, means that the "SUNSET" mode is not activate.
that the "SUNSET" mode is activate.
Note: when setting the sunset function, the light must be turned on.
5. SNOOZE
• When the alarm is turning on, if you press the SNOOZE the sound turns off automatically come on again after about 5
minutes.
• It will be off after the ringing for 1 minute, and repeat in 1 minute later. It will repeat 5 times.
If we use the radio as alarm sound, the alarms keeps ringing until you press the RADIO / SOUND button and if you
will not flash, press ALARM again to exit the alarm mode, the alarm is off
is not shown in the time display mode. If you want to turn on the alarm function,
will displayed, then press AL ON / OFF, the icon
ENG-4
is displayed.
will displayed.
In the display you can see
EN
will
will flash, press
that means
that means

Publicidad

Tabla de contenido
loading

Tabla de contenido