Publicidad
Idiomas disponibles
Idiomas disponibles
2
PROCEDURE STEPS:
1. Disconnect the negative battery cable.
2. Raise and support the vehicle.
3. Remove the three fasteners (2) that secure each front
wheel house splash shield to the front fascia assem
bly.
4. Pull back on the front wheel house splash shield and
remove the fastener (1) that secures the front fascia
assembly to the fender.
5. Repeat the removal steps for the opposite side.
6. Remove the four fasteners (1) that secure the rear
belly pan (2) to the underside of the vehicle.
7. Pull the rear belly pan (2) rearward to detach from the
front belly pan and remove from the vehicle.
Feb 10, 2011
www.mopar.com
K6861143
Publicidad
