Publicidad
Idiomas disponibles
Idiomas disponibles
8. Remove the six screws (4) that secure the front belly pan (2) to the underside of the vehicle's front fascia.
9. Remove the six screws (1) that secure the front belly pan (2) to the underside of the vehicle's front wheel house
splash shield.
10. Remove the four push pin fasteners (3) that secure the front belly pan (2) to the underside of the vehicle's lower
crossmember.
11. Remove the front belly pan (2) from the underside of the vehicle.
12. Lower the vehicle.
13. Pull out on the fascia at the upper fender to disengage
the fascia (1) from the upper fender retaining bracket.
Repeat on the opposite side.
14. Pull out on the fascia at the wheel house opening
to disengage the fascia (2) from the fender retaining
bracket. Repeat on the opposite side.
Feb 10, 2011
www.mopar.com
3
K6861143
Publicidad
