Mopar 82212557 Instrucciones De Montaje página 9

38. Position the front belly pan (2) to the vehicle.
39. Install the four push pin fasteners (3) that secure the front belly pan (2) to the underside of the vehicle's lower cross­
member.
40. Install the six screws (1) that secure the front belly pan (2) to the underside of the vehicle's front wheel house splash
shield. Tighten the screws securely.
41. Install the six screws (4) that secure the front belly pan (2) to the underside of the vehicle's front fascia. Tighten the
screws securely.
NOTE: During installation, ensure rear belly pan is
shingled underneath front belly pan. Failure to do so
may result in damage to belly pan.
42. Position the rear belly pan (2) to the underside of the
vehicle and to the front fascia.
43. Install the fasteners (1) that secure the rear belly pan
(2) to the underside of the vehicle. Tighten the fasten­
ers securely.
Feb 10, 2011
www.mopar.com
9
K6861143