Mopar 82212557 Instrucciones De Montaje página 7

25. Align the mounting tabs into their prospective slots
and push firmly on the outside of the grille to seat.
Start in one corner and work in a clockwise motion. A
loud click/snap sound is normal when installing.
NOTE: To aid in installation, lay the fascia on it's back
with it's front facing up. Support with wood blocks
between the back of the fascia and the floor/tabletop/
bench in the area you are installing.
26. Look from the rear of the fascia and inspect that all
mounting tabs are seated properly.
27. Install the fasteners (1) securing the grille to the fas­
cia. Tighten the fasteners securely.
28. Position the lower inner fascia support (2) to the fas­
cia.
29. If equipped, attach the adaptive cruise control harness
(1) to the lower inner fascia support (2).
30. Install the retaining clip (1) securing the lower inner
fascia support to the fascia. Repeat on the opposite
side.
Feb 10, 2011
www.mopar.com
7
K6861143